Tower Speaker

Polk ES 55

Driver Enclosure Type Power Port Bass Vented Impedance Compatible with 4 and 8 ohm outputs Sensitivity (1 watt @ 1 meter) 90 dB Crossover Frequency 2,500 Hz Total Frequency Response 40 Hz † 40,000 Hz Type 2-way Recommended Amplifier Power Per Channel 20 watts † 200 watts Inputs Dual gold-plated 5-way binding posts

Polk Audio ES 60

Sensitivity (1 watt @ 1 meter) 90 dB Crossover Frequency 2,500 Hz Total Frequency Response 36 Hz † 40,000 Hz Impedance Compatible with 4 and 8 ohm outputs Recommended Amplifier Power Per Channel 20 watts † 300 watts Inputs Dual gold-plated 5-way binding posts Dolby Atmos & DTS:X Compatible yes

HECO Celan Revolution 7

Brand: Heco Construction: 3-Way Drivers: Dynamic Sensitivity: 92dB Power (RMS): 220W

POLK MONITOR XT70

Qty Included 2 Width 9.25" (23.5 cm) Height 40.4" (102.6 cm) Depth 12.5" (31.8 cm) Weight 35 lbs (15.88 kg) Front Array Driver Complement (1) 1" (2.54 cm) Terylene Dome Tweeter (2) 6.5" (16.51 cm) Bi-laminate Paper Woofer (2) 8" (20.32 cm) Passive Bass Radiators Sensitivity (1 Watt @ 1 Meter) - 89 dB Crossover Frequency 2,700 Hz Total Frequency Response 35 Hz † 40,000 Hz Impedance Compatible with 4- and 8-ohm outputs Recommended Amplifier Power Per Channel 25 watts † 200 watts Speaker Inputs 5-way nickel plated binding posts

POLK XT60

1" Terylene dome tweeter 6-1/2" bi-laminate paper cone woofer Two 6-1/2" passive bass radiators handles up to 200 watts Impedance: 8 ohms Frequency response: 38-40,000 Hz Sensitivity: 86 dB 5-way nickel-plated binding posts

POLK R700 Audio Speaker

Transducer 1³ Ring Radiator 6  Turbine Cone Dual 8³ Woofers Minimum Impedance 3.6Î Sensitivity 88dB SPL Frequency Response 38Hz “ 37kHz Designed for R900 Yes Dimensions (W x H x D) For One Speaker (sold in pairs) 329.3mm x 1185.9mm x 404mm 12.96 x 6.69 x 15.91 320.7mm x 1143.8mm x 428.3mm 12.6 x 45 x 16.9 Weight 77.89Ibs/35.39kg

POLK R600

Transducer 1³ Ring Radiator Two 6  Turbine Cone Minimum Impedance 4.0Î Sensitivity 87.5dB SPL Frequency Response 38Hz “ 38kHz Designed for R900 Yes Dimensions (W x H x D) 280.7mm x 1063.8mm x 381.6mm 11 x 41.9 x 15 Weight 47.3Ibs/21.5kg

POLK R500

Transducer 1³ Ring Radiator Two 5 ¼ Turbine Cone Minimum Impedance 3.9Î Sensitivity 87dB Frequency Response 49Hz “ 36kHz Designed for R90 Yes Dimensions (W x H x D) 255.4mm x 1044.5mm x 348.8mm 10.1 x 41.1 x 13.7 Weight 39Ibs/17.7kg

TAGA PLATINIUM F-120 V.3 FLOORSTANDING SPEAKERS

Design Floorstanding, 3-way, 4 drivers, 1 passive radiator Bi-wiring, bi-amp TLIE-I enclosure Crossover points: 450Hz, 4.7kHz Power handling 20 - 280W (recommended amplifier power) 210W RMS Frequency response 28Hz - 40kHz Bass-reflex Rear double Impedance 4ohm Sensitivity 93dB High-frequency driver 25 mm (1), TPTTD-I, TWG-I, TTP Midrange driver 133 mm (5.25") TPACD-I, TRCS Bass driver 2 x 165 mm (6.5"), TPACD-I, TRCS Passive radiator: 165 mm (6.5) TPAPR-I, TRCS Features/accessories Magnetically mounted grill Dimensions (H x W x D) 118 x 25 x 34 cm (incl. grill, feet, and spikes) Weight 23.3 kg / pc. (incl. grill, feet, and spikes)

TAGA PLATINIUM F-100 V.3 FLOORSTANDING SPEAKERS

Design Floorstanding, 3-way, 4 drivers Bi-wiring, bi-amp TLIE enclosure Crossover points: 700Hz, 4kHz Power handling 20 - 250W (recommended amplifier power) 190W RMS Frequency response 30Hz - 40kHz Bassreflex Front single Impedance 6ohm Sensitivity 92dB High-frequency driver 25 mm (1), TPTTD, TTP, TWG Midrange driver 133 mm (5.25), TPACD Bass driver 2 x 165 mm (6.5), TPACD Dimensions (H x W x D) 108.9 x 25 x 34 cm (height incl. base, exc. spikes) Weight 20.1 kg / pc. (incl. base)

TAGA PLATINIUM F-90 SL V.2

Design Floorstanding, 3-way, 4 drivers, 1 passive radiator Bi-wiring, bi-amp TLIE-I enclosure Crossover points: 620Hz, 3.7kHz Power handling 20 - 240W (recommended amplifier power) 180W RMS Frequency response 31Hz - 40kHz Bassreflex Rear single Impedance 4ohm Sensitivity 91dB High-frequency driver 25 mm (1), TPTTD-I, TWG-I Midrange driver 133 mm (5.25") TPACD-I, TRCS Bass driver 2 x 133 mm (5.25"), TPACD-I, TRCS Passive radiator: 133 mm (5.25) TPAPR-I, TRCS Features / accessories Magnetically mounted grill Dimensions (H x W x D) 101.1 x 17 x 31 cm (excl. feet and spikes) Weight 16 kg / pc. (excl. feet and spikes)

Polk T50

FYNE AUDIO FA501iC

System Type 2 way IsoFlare loudspeaker for in ceiling or in wall application Peak power handling (Watt) 250 Continuous power handling (Watt RMS) 62.5 Sensitivity (2.83 Volt @ 1m) 89dB Nominal impedance 8 Ohm

MAGNAT TEMPUS 55 Tower Speaker

The Tempus 55 is designed as a compact 2.5-way floorstanding speaker and is equipped with two 170 mm FE Dynamics chassis. The Klippel-optimized, lightweight coated paper cone ensures an excellent resolution and optimum speed. A ventilated voice coil unit is utilized in this setup for maximum load capacity.

HECO Aurora 1000

PRINCIPLE 3 way floorstanding speaker, bass reflex SENSITIVITY (2.8V/1M) “93 dB EQUIPMENT 170 mm midrange / 2 x 8 woofer / 28 mm tweeter IMPEDANCE 4 “ 8 Ohms CROSSOVER FREQUENCIES 260 Hz, 3.300 Hz POWER HANDLING (RMS/MAX) 230 / 380 Watts FREQUENCY RESPONSE 22 “ 42.500 Hz RECOMMENDED AMPLIFIER OUTPUT 30 “ 380 W DIMENSIONS (WXHXD) Cabinet: 235 x 1200 x 375 mm

FYNE AUDIO F302 Tower Speaker

F302 ; Sensitivity (2.83 Volt @ 1m), 90dB ; Nominal impedance, 8 Ohm ; Frequency response (-6dB typical in room), 36Hz-28kHz ; Drive unit complement, 1 x 150mm ... Frequency response (-6dB typical in room): 36... Crossover frequency: 3.2kHz

HECO La Diva

Technical specifications PRINCIPLE 3 way, quad bass radiator RECOMMENDED AMPLIFIER OUTPUT 30 - 550 Watts DIMENSIONS (WXHXD) 295 x 1310 x 435 mm Dimensions (wxhxd) incl. terminal and feet 385 x 1340 x 465 mm

HECO Celan Revolution 9 Tower Speaker

PRINCIPLE 3 way, quad bass radiator SENSITIVITY (2.8V/1M) 93 dB EQUIPMENT 2 x 8 woofer 6.5 midrange 1.2" Dome-tweeter IMPEDANCE 4 “ 8 Ohms CROSSOVER FREQUENCIES 230 Hz, 2.800 Hz POWER HANDLING (RMS/MAX) 280 / 450 Watts FREQUENCY RESPONSE 19 - 52.000 Hz RECOMMENDED AMPLIFIER OUTPUT 30 - 450 Watts Dimensions (wxhxd) incl. terminal and feet 374 x 1272 x 440 WEIGHT 38.4 kg

HECO Aurora 700

PRINCIPLE. 3 way floorstanding speaker, bass reflex. SENSITIVITY (2.8V/1M) 92 dB. EQUIPMENT. 6.5" midrange, 2 x 6.5" woofer, 1" dome-tweeter. IMPEDANCE. 4 - 8 Ohms. CROSSOVER FREQUENCIES. 290 Hz, 3,300 Hz. POWER HANDLING (RMS/MAX) 230 / 300 Watts. FREQUENCY RESPONSE. 25 - 42,500 Hz. RECOMMENDED AMPLIFIER OUTPUT. 30 - 300 W.

Fyne Audio F502 Home Theatre Speaker

System Type 2 way, downwards firing port, with BassTraxTM Tractrix diffuser. Twin cavity coupled reflex Recommended amplifier power (Watt RMS) 40- 180 Continuous power handling (Watt RMS) 90 Sensitivity (2.83 Volt @ 1m) 91dB Nominal impedance 8 Ohm Frequency response (-6dB typical in room) 30Hz- 34kHz Drive unit complement 1 x 200mm IsoFlareTM, multi-fibre bass/ mid, with 25mm titanium, dome compression tweeter. 1 x 200mm multi-fibre bass Crossover frequency 250Hz & 1.7kHz Crossover type 2nd order low pass, 1st order high pass Dimensions - HxWxD 1114 x 322 x 380mm (43.9 x 12.7 x 15.0) Weight - Each 25.2kg (55.6lb) Finishes Dark Oak / Black Oak / Piano Gloss Black / Piano Gloss White

MAGNAT SIGNATURE 507 Tower Speaker

SIGNATURE 507 4 way, double bass, bass reflex DRIVERS 2 x 6.5 woofer, 6.5 midrange, 1.2 dome-tweeter, 0.75 super-tweeter POWER HANDLING (RMS/MAX) 200 / 350 watts IMPEDANCE 4 “ 8 ohms FREQUENCY RESPONSE 23 “ 53000 Hz CROSSOVER FREQUENCIES 400 Hz/2800 Hz/17500 Hz RECOMMENDED AMPLIFIER OUTPUT > 30 watts SENSITIVITY 92 dB CABINET SURFACE Front: Piano black / Cabinet: Ash decor black Front: Anthracite satin / Cabinet: Ash decor mocca DIMENSIONS (WxHxD) Cabinet: 205 x 1030 x 332 mm Cabinet incl. feet and terminal: 286 x 1070 x 332 mm WEIGHT 18.8 kg

FYNE AUDIO F302i Tower Speaker

System Type 2 way, rear ported Drive unit complement 1 x 150mm multi-fibre bass / mid 1 x 25mm titanium dome tweeter Crossover frequency 3.2kHz Crossover type 2nd order low pass, 3rd order high pass Dimensions - HxWxD 932 x 233 x 308mm (36.7 x 9.2 x 12.1)

Taga Harmony TAV-807 F FLOORSTANDING SPEAKERS

Design Floorstanding, 3-way, 4 drivers TLIE-I enclosure Crossover points: 450Hz, 3kHz Power handling 20 - 180W (recommended amplifier power) 135W RMS Frequency response 30Hz - 25kHz Bassreflex Rear single Impedance 6ohm Sensitivity 90dB High-frequency driver 25 mm (1), TWG-I Midrange driver 165 mm (6.5") Bass driver 2 x 203 mm (8") Features / accessories Feet Aluminum spikes Dimensions (H x W x D) 105 x 25 x 34 cm (excl. feet / spikes) 109.5 cm (height incl. feet / spikes) Weight 19.8 kg / pc. (excl. feet)

FYNE AUDIO F501

POLK L800

Number of Loudspeakers (Speaker Systems) 2 Cabinet Finish (Speakers) Black Ash Power Rating (Speakers) 25 - 300W Impedance (Speakers) 2.8 ohms - 4 ohms Frequency Response (Speakers) 25Hz - 50kHz Sensitivity (Speakers) 87 dB Crossover Frequencies 370Hz - 2800Hz Multi-Driver System 3-way Woofer (Speakers) 10" Mid-Range Driver (Speakers) 5-1/4" Tweeter (Speakers) 1"

Kef Q750 Tower Speaker

Brand Name KEF Speaker Type Tower Colour Name Walnut Peak Power Handling - Speakers 100 Watts Product Dimensions 38.1 x 44.45 x 119.38 cm; 20.87 Kilograms Item model number SP3961WA Manufacturer KEF Item Weight 20 kg 900 g

Qacoustics Q Active 400 Tower Speaker

Enclosure Type Reflex (ported) Full range driver 2 x BMR 58mm (2.25in) Subwoofer (high excursion) 2 x 114mm (4.5in) Crossover frequency 150Hz System frequency response (free boundary) 35Hz to 20kHz (-6dB) Power (per speaker) :- Continuous power 140W Peak power 440W Power requirement 100 “ 240 VAC, 50/60 Hz Un-boxed weight (per speaker) 17.5kg Dimensions (per speaker) H x W x D 825 x 320 x 290mm (32.5 x 12.6 x 11.4in) incl. spikes & stabiliser Hi-Res Wireless Link frequency 5.8GHz Sample frequency 96kHz Bit depth 24bits Max Source Resolution 32bit/192kHz colors Black, White

FYNE AUDIO F501SP Tower Speaker

System Type 2 way, downwards firing port, with BassTraxTM Tractrix diffuser*, twin cavity loading system Recommended amplifier power (Watt RMS) 30 180 Continuous power handling (Watt RMS) 80 Sensitivity (2.83 Volt @ 1m) 91dB Nominal impedance 8 Ohm Frequency response (-6dB typical in room) 36Hz 34kHz Drive unit complement 1 x 150mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm magnesium dome compression tweeter, neodymium magnet system. 1 x 150mm multi-fibre bass cone, FyneFlute surround. Crossover frequency 250Hz & 1.7kHz Crossover type Bi-wired passive low loss, 2nd order low pass, 1st order high pass. Cryo-Lite treated. Dimensions - HxWxD 984 x 288 x 320mm (38.7 x 11.3 x 12.7) Weight - Each 21.0kg (46.3lb) Finishes Piano Gloss Walnut / Piano Gloss Black / Piano Gloss White

Polk T-50 Tower Speaker

Qacoustics concept 50 Tower SPeaker

Every element of acoustic innovation featured in the Concept 50 is geared towards designing the quietest cabinet possible. Unaffected by internal and external resonances these speakers deliver focused stereo imaging, accurate audio and an extended holographic soundstage to emulate a live performance in the home.

Q Acoustics 3050I Floorstanding Tower Speaker

FYNE AUDIO F1-10S Tower Speaker

System Type 2 way, downwards firing port with BassTrax Tractrix diffuser Recommended amplifier power (Watt RMS) 20 - 280 Peak power handling (Watt) 500 Continuous power handling (Watt RMS) 140 Sensitivity (2.83 Volt @ 1m) 94dB Nominal impedance 8 Ohm Frequency response (-6dB typical in room) 26Hz - 26kHz Drive unit complement 1 x 250mm IsoFlare point source driver with FyneFlute surround, multi-fibre bass / midrange cone, with 75mm titanium alloy dome compression tweeter, neodymium magnet system Crossover frequency 750Hz Crossover type Bi-wired passive low loss, 2nd order low pass, 2nd order high pass, Deep Cryogenically Treated System adjustments High frequency energy (750Hz - 26kHz) +/-3dB Presence (2.5kHz - 5.0kHz) +/- 3dB Dimensions - HxWxD 1191 x 405 x 581mm (46.9 x 15.9 x 22.9) Weight - Each 57.7kg Finishes Piano Gloss Walnut

FYNE AUDIO F502SP Tower Speaker

System Type 2 way, downwards firing port, with BassTraxTM Tractrix diffuser*, twin cavity loading system Recommended amplifier power (Watt RMS) 30- 200 Continuous power handling (Watt RMS) 100 Sensitivity (2.83 Volt @ 1m) 92dB Nominal impedance 8 Ohm Frequency response (-6dB typical in room) 30Hz - 34kHz Drive unit complement 1 x 200mm IsoFlare point source driver, multi-fibre bass/ midrange cone, FyneFluteTM surround with 25mm magnesium dome compression tweeter, neodymium magnet system. 1 x 200mm multi-fibre bass cone, FyneFluteTM surround. Crossover frequency 250Hz & 1.7kHz Crossover type Bi-wired passive low loss, 2nd order low pass, 1st order high pass. Cryo-Lite treated. Dimensions - HxWxD 1111 x 338 x 380mm (43.7 x 13.3 x 15.0) Weight - Each 30.4kg (67.0lb)

FYNE AUDIO CLASSIC X Tower Speaker

System Type 2 way, downwards firing port, with BassTrax Tractrix diffuser Recommended amplifier power (Watt RMS) 20 - 280 Peak power handling (Watt) 560 Continuous power handling (Watt RMS) 140 Sensitivity (2.83 Volt @ 1m) 94dB Nominal impedance 8 Ohm Frequency response (-6dB typical in room) 28Hz- 26kHz Drive unit complement 1 x 250mm IsoFlare point source driver, multi-fibre bass / midrange cone, with 75mm titanium alloy dome compression tweeter, ferrite magnet system Crossover frequency 750Hz Crossover type Bi-wired passive low loss, 2nd order low pass, 2nd order high pass. Cryo-Lite treated. System adjustments High frequency energy (1.8kHz - 26kHz) +/- 3dB, Presence (2.5kHz - 5.0kHz) +/- 3dB Dimensions - HxWxD 918 x 450 x 381mm (36.1 x 17.7 x 15.0") Weight - Each 45.2kg Finishes Walnut

FYNE AUDIO F1-12S Tower Speaker

System Type 2 way, downwards firing port, with BassTrax Tractrix diffuser Recommended amplifier power (Watt RMS) 20 - 350 Peak power handling (Watt) 600 Continuous power handling (Watt RMS) 175 Sensitivity (2.83 Volt @ 1m) 96dB Nominal impedance 8 Ohm Frequency response (-6dB typical in room) 24Hz - 26kHz Drive unit complement 1 x 300mm IsoFlare point source driver with FyneFlute surround, multi-fibre bass / midrange cone, with 75mm titanium dome compression tweeter, neodymium magnet system Crossover frequency 750Hz Crossover type Bi-wired passive low loss, 2nd order low pass, 2nd order high pass, Deep Cryogenically Treated System adjustments High frequency energy (750Hz - 26kHz) +/-3dB Presence (2.5kHz - 5.0kHz) +/- 3dB Dimensions - HxWxD 1350 x 450 x 680mm (53.2 x 17.7 x 28.6) Weight - Each 72kg Finishes Piano Gloss Walnut

FYNE AUDIO CLASSIC XII Audio Speaker

System Type 2 way, downwards firing port, with BassTrax Tractrix diffuser Recommended amplifier power (Watt RMS) 20 - 350 Peak power handling (Watt) 700 Continuous power handling (Watt RMS) 175 Sensitivity (2.83 Volt @ 1m) 96dB Nominal impedance 8 Ohm Frequency response (-6dB typical in room) 25Hz- 26kHz Drive unit complement 1 x 300mm IsoFlare point source driver, multi-fibre bass / midrange cone, with 75mm titanium alloy dome compression tweeter, ferrite magnet system Crossover frequency 750Hz Crossover type Bi-wired passive low loss, 2nd order low pass, 2nd order high pass. Cryo-Lite treated. System adjustments High frequency energy (750Hz - 26kHz) +/- 3dB Presence (2.5kHz - 5.0kHz) +/- 3dB Dimensions - HxWxD 948 x 550 x 421mm (37.3 x 21.7 x 16.6") Weight - Each 54.5kg Finishes Walnut

FYNE AUDIO F1-8S

FYNE AUDIO F701 Audio Speaker

System Type 2 way, downwards firing port with BassTrax Tractrix diffuser Recommended amplifier power (Watt RMS) 30 - 180 Peak power handling (Watt) 360 Continuous power handling (Watt RMS) 90 Sensitivity (2.83 Volt @ 1m) 91dB Nominal impedance 8 Ohm Frequency response (-6dB typical in room) 35Hz - 34kHz Drive unit complement 1 x 200mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm magnesium dome compression tweeter, neodymium magnet system Crossover frequency 1.7kHz Crossover type Bi-wired passive low loss, 2nd order low pass, 1st order high pass. Cryo-Lite treated. Dimensions - HxWxD 465 x 278 x 389mm (18.3 x 10.9 x 15.3) Weight - Each 13.6 (30.0lbs)

FYNE AUDIO CLASSIC VIII Audio Speaker

System Type 2 way, downwards firing port, twin cavity, BassTrax Tractrix diffuser Recommended amplifier power (Watt RMS) 30 - 200 Peak power handling (Watt) 400 Continuous power handling (Watt RMS) 100 Sensitivity (2.83 Volt @ 1m) 91dB Nominal impedance 8 Ohm Frequency response (-6dB typical in room) 30Hz - 34kHz Drive unit complement 1 x 200mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm magnesium dome compression tweeter, ferrite magnet system. Cryo-Lite treated. Crossover frequency 1.8kHz Crossover type Bi-wired passive low loss, 2nd order low pass, 1st order high pass System adjustments High frequency energy (1.8kHz - 26kHz) +/- 3dB, Presence (2.5kHz - 5.0kHz) +/- 3dB Dimensions - HxWxD 873 x 380 x 300mm (34.4 x 15.0 x 11.8") Weight - Each 29.1kg Finishes Walnut

MAGNAT SIGNATURE 505 Tower Speaker

PRINCIPLE 3.5 way, dual 6.5" woofer-midrange, bass reflex DRIVERS 6.5 woofer-midrange 1.2" dome-tweeter 0.75" super-tweeter 6.5 woofer POWER HANDLING (RMS/MAX.) 170/300 Watts SENSITIVITY (2.8V/1M) 92 dB IMPEDANCE 4 8 Ohms FREQUENCY RESPONSE 24 - 53000 Hz CROSSOVER FREQUENCIES 330 Hz / 2800 Hz / 17500 Hz DIMENSIONS (WXHXD) Enclosure: 205 x 930 x 332 Enclosure incl. Spikes: 286 x 970 x 332 mm

Magnat Tempus 77 Tower Speaker

Principle 3-way bass reflex Crossover Frequencies 320 Hz, 3,300 Hz Recommended Amplifier Output ab 30 watts Sensitivity (2.8V/1m) 92 dB Cabinet surface Ash Decor Black

FYNE AUDIO F502 8 Tower Speaker

System Type 2 way, downwards firing port, with BassTraxTM Tractrix diffuser. Twin cavity coupled reflex Recommended amplifier power (Watt RMS) 40- 180 Continuous power handling (Watt RMS) 90 Sensitivity (2.83 Volt @ 1m) 91dB Nominal impedance 8 Ohm Frequency response (-6dB typical in room) 30Hz- 34kHz Drive unit complement 1 x 200mm IsoFlareTM, multi-fibre bass/ mid, with 25mm titanium, dome compression tweeter. 1 x 200mm multi-fibre bass Crossover frequency 250Hz & 1.7kHz Crossover type 2nd order low pass, 1st order high pass Dimensions - HxWxD 1114 x 322 x 380mm (43.9 x 12.7 x 15.0) Weight - Each 25.2kg (55.6lb)

FYNE AUDIO 303i Tower Speaker

System Type 2 way, rear ported Sensitivity (2.83 Volt @ 1m) 91dB Nominal impedance 8 Ohm Frequency response (-6dB typical in room) 32Hz - 34kHz Drive unit complement 2 x 150mm multi-fibre bass / mid 1 x 25mm titanium dome tweeter

FYNE AUDIO F303 Tower Speaker

System Type 2 way, rear ported Recommended amplifier power (Watt RMS) 35- 150 Continuous power handling (Watt RMS) 75 Sensitivity (2.83 Volt @ 1m) 91dB Nominal impedance 8 Ohm Frequency response (-6dB typical in room) 32Hz- 28kHz Drive unit complement 2 x 150mm multi-fibre bass/ mid 1 x 25mm polyester dome tweeter Crossover frequency 3.2kHz Crossover type 2nd order low pass, 3rd order high pass Dimensions - 962 x 233 x 308mm (37.9 x 9.2 x 12.1) Weight - Each 14.6kg (32.2lb)

Focal Chora 826

They feature a 4-way design with exclusive TNF tweeter and slatefibre cone. Dolby Atmos Effect With Dolby Atmos positioned on the top of the Chora 826-D, the sound is directed to the ceiling and then reflected back on to the listener in perfect spatialisation. High speed chases, crashing waves and booming thunder crashes are brought to life with amazing clarity.

Focal Chora-816

The Chora 816 model is a 2.5-way bass-reflex floorstanding loudspeaker. Its woofer and midrange/bass speaker driver, both equipped with the Slatefiber cone, work in perfect harmony for a voluptuous sound reproduction and a perfect bass impact. The sound finds its full dimension in your listening room, with a dynamic midrange and remarkable power handling.

Focal Chora 806

Focal FCHORA806BK Chora 806 Black 2-Way Bookshelf Speaker (Pair) The Chora 806 loudspeaker showcases meticulous manufacturing and design. Let yourself be transported bythe delightful, dynamic musical qualityemitted by its 61/2 (16.5cm) bass/midrange speaker driver, equipped with the exclusive FocalSlatefiber cone. Alongside theTNF Aluminium/Magnesium tweeterwith its silky treble, the "slate colour of the speaker driver makes it an attractive yet high-performance solution.

B&W 603 S2 AE

Specifications Size & weight Dimensions Height: 985mm (38.8 in) cabinet only 1055mm (41.5 in) with plinth Width: 190mm (7.5 in) cabinet only 320mm (12.6 in) with plinth Depth: 340mm (13.4 in) 370mm (14.6 in) with plinth Net weight 24.1 kg (53.1 lb)